VOLVO 122 Parts : Drive Shaft - Table of Contents
|
A common failure on VOLVOs is the center bearing seizing (1) and/or rubber donut support (2) failure. Measure diameter with a caliper to get the correct replacement parts. Most later models have a 2 inch diameter shaft. |
| Item | Description Help on catalogue format | Model | Year | Part# | Type | Price | Buy |
| 1 | Center bearing, for cars with a 1 3/4 inch diameter drive shaft | 122s,123GT | 67-70 | 181549 | New | $18.02 | |
| 1 | Center bearing, for 1961 to 1966 | 122s,123GT | 61-66 | 181252 | New | $41.75 | |
| 2 | Center bearing rubber support donut, for cars with a 1 3/4 inch diameter shaft | 122s,123GT | 67-70 | 675367 | New | $11.96 | |
| 2 | Center bearing rubber support, for 1961 to 1966 (2 required) | 122s,123GT | 61-66 | 658653 | New | $5.04 | |
| 5 | U-Joint | 122s,123GT | 56-70 | SC1217606 | New | $11.36 | |
| 6 | U-Joint | 122s,123GT | 56-70 | SC1217606 | New | $11.36 | |
| 7 | U-Joint | 122s,123GT | 56-70 | SC1217606 | New | $11.36 |
Back to Table of Contents
Shopping Cart
| Ordering Information
| Customer Service | About
VOLVO Model Production | Pictures
| Engines | Color Codes
| VIN plates
VLVworld.com
- Your Internet VOLVO Part and Accessory Store, Since 1997
Copyright 1997-2006 VLVworld.com. All rights reserved.
Page 120.4.4